
A note from Carlsbad, winter 2026: "The dent on the panel, HOA does not like it Need to replace."
That one ended up as a new insulated door. It doesn't always have to. Clopay's answer on replacing a section is yes, "provided we still manufacture the door model you own." So the first job is finding out what you own.
Find the label
From inside, with the door closed, look for a sticker. Clopay says most of its doors have one on the interior side, often along the edge of a section or near the bottom panel, listing the model. Take a photo of it.
Don't touch anything around it. Clopay's steel door manual says the brackets at the bottom corners "are under great tension."
To order a section, Clopay asks for four things: model, section size, color, and which section. If your door is another brand, the same four answers are still what you'll want on hand. Custom carriage house styles are harder. Clopay says those "can make replacement challenging."
What happened on our own panel jobs
We sorted our tickets by hand, late May 2025 to early November 2026, and found 67 residential ones where a door got hit, a panel was damaged, or someone asked for panels.
- 7 got new panels and kept the rest of the door. All seven included the bottom section, and six were the bottom section alone.
- 4 became whole new doors, with two more quoted that way.
- 23 got no new panel on that visit.
The rest were sections-only jobs or tickets that never went ahead.
"Door not available at clopay"
That's a note from 92108, late 2025. The same note says a new panel "won't match the old one," and the customer was going to check with her HOA.
It doesn't always go that way. A Clopay bottom panel got ordered in the same ZIP that fall, with "3-4 weeks" in the note, and it was done by December. A job in Vista had "1-2 week lead time" on an Amarr panel. Lead times change, so treat those as examples and not a promise for your door.
Getting it to match
Color is the other thing to plan for. Clopay says weather can change the color over time, "so the replacement section may not be a perfect match."
Of our seven swaps, one had the new section painted to match, and two had the entire door painted. The other four show no paint.
Before you paint, check your warranty. Amarr says repainting one of its doors voids the paint finish warranty, and warns that dark colors can cause thermal bowing on insulated doors.
If you have an HOA, check its rules before anyone orders a panel. Six of those 67 tickets mention one.
When the dent is more than a dent
A dent can be cosmetic, or it can stop a section from bending at its hinges. If the door binds, sticks or runs crooked past the damage, stop using it. Springs and cables aren't homeowner work, and Clopay recommends a professional for door sections too.
A new panel isn't the only way out, either. In Rancho Santa Fe in fall 2025 a vehicle hit a door from the inside: bottom panel bent, damage reaching the last two panels, one short roller off the track. The tech recommended new panels or a new door. The ticket shows a temporary repair instead, with longer rollers, a strut, and the panel straightened as far as it would go. The ticket says plainly that the door should still be replaced in the near future.
Struts show up on 8 of the 23 tickets where no new panel went on.
Have your label photo ready when you call (619) 808-6343 about panel repair.